Thursday, 17 August 2017

My Cart

0 Products. Total: $0.00

Sinbad Cyanoacrylate Glues

  Gripes Cures Usage
Sinbad Filler Glue 5 Seconds 1 hr. Cracks, Holes, Leaks
Sinbad Glue Stone 30-60 seconds 1-8 hrs. Metal, Rubber, Vinyl
Sinbad Glue & Accelerator Aluminum 30-60 seconds 8-24 hrs. Plastics, Pewter, Glass
Sinbad Glue Gel 45-60 seconds 8-12 hrs. Wood, Leather, Cork Canvas, plus works on everything Sinbad Glue does, also needs accelerator with plastics, pewter, glass, aluminum.
Sinbad Glue Gel-2 grams 3 minutes 8-12 hrs. Wood, Leather, Cork, Canvas, plus everything Sinbad Glue works on, also needs accelerator with plastics, pewter, glass, aluminum. The grip time is longer so you have more time to move it the item around.

 

The chart is a guide used for average item’s, it does not take in consideration conditions such as oil, dirt, rust and material defects.

Gluing Tips

Clean the surface of the material (free of oil, grease, rust).

We do not have to worry about the inside nozzle because it has a Pin in the cap: But we do have to worry about the outside of the nozzle. Place a little of the Sinbad gloves around the outside of the nozzle before you use the glue then wipe it off when you get done. This way the nozzle won’t get a build-up and you won’t glue the top onto the lid.

Keep glue in the refrigerator.

Keep in mind the Sinbad Glue Dries clear.

Water resistant.

Set Descending Direction
per page

Set Descending Direction
per page